Talos Principle 2: Wooded Plateau All Puzzle Talos Principle 2 guide, puzzles

Having trouble with the puzzles in the Wooded Plateau? Our Talos Principle 2 guide explains how to solve all the lost and main puzzles - Keeping Connections, Passage, Loop.

Last update: 10 November 2023

On this page of our Talos Principle 2 guide, you can find solutions to all puzzles from Wooded Plateau. Even the more demanding sequences like Eye of the Needle, Duet, and Mutual Aid also received detailed walkthroughs. If text version is not enough, our video guides will help you solve even the hardest challenges step-by-step.

• Main Puzzle #1 - Quantum Tunnelling
• Main Puzzle #2 - Mutual Aid
• Main Puzzle #3 - Backup
• Main Puzzle #4 - Placement
• Main Puzzle #5 - Duet
• Main Puzzle #6 - Passage
• Main Puzzle #7 - Eye of the Needle
• Main Puzzle #8 - Seesaw
• Lost Puzzle #1 - Keeping Connections
• Lost Puzzle #2 - Loop

Main Puzzle #1 - Quantum Tunnelling

1. After entering the puzzle area, turn right and go past the purple barrier.
2. Pick up the Driller.

1. Place the driller so it drills a hole near the second driller.
2. Approach the second drill.

1. Pick up the second drill and put it through the hole.

1. Pick up the second drill again and drill a hole near the first drill.
2. Go through the barrier and pick up the first drill.

1. Put the first drill through the hole.
2. Now, both drills are through the barriers and you can bring them to the next phase of the puzzle.

1. Pick up the first drill and make a hole in the wall near the barrier so you can access the next room.
2. Pick up the second drill and put it through the hole.

1. Go back to the first drill and pick it up.
2. Place it by the wall but don't start it yet.
3. Go back to the second drill and make a hole.
4. Now you can move the first drill to a new area.

1. Place both drills on the platforms.
2. Activate the terminal.

Main Puzzle #2 - Mutual Aid

1. Point the Jammer to the barrier next to the red button.

1. Place the drill behind the barrier and aim it at the wall as shown in the screenshot above.
2. Once the red laser hits the red button, you'll be able to take the jammer.

1. Use the drill to make a hole in the wall next to the next barrier.
2. Point the jammer at the barrier and place it by the hole.

1. Once the barrier is gone, proceed further and transfer the jammer through the hole.
2. Point the jammer at the barrier and take the drill.

1. Remove the final barrier with the jammer.
2. Pick up the drill and place it on the platform before the terminal.

Main Puzzle #3 - Backup

1. Pick up the drill and make a hole in the wall near the blue button.
2. Move the first connector through the hole.

1. Use the connector to create a connection between blue laser and the blue button.
2. With the barrier down, take the RGB converter.

1. Move the drill to the opposite wall.
2. Pick up the first connector and make a connection between red laser and the red button.
3. With the barrier gone, you can now pick up the second connector.

1. Connect the second connector with the first one and red laser.
2. You can now go pick up the drill.

1. Make a hole in the wall that blocks the blue laser.
2. Pick up the converter.
3. Make a connection between the first connector, blue laser, and green button.

1. With the last barrier gone, you can now approach the terminal.

Main Puzzle #4 - Placement

1. Activate the floor fan.

1. Pick up the drill and make a hole in the wall at the end of the room.
2. Transfer the connector through the created hole.
3. Now you need to pick up the hexahedron that is opposite the floor fan.

1. Pick up the jammer.
2. Drill a hole near the platform.

1. Pick up the connector and approach the jammer.
2. Transfer the connector through the hole and place it on the platform.

1. Pick up the hexahedron.
2. Jump on the floor fan.
3. Jump to the pillar.

1. Leave the hexahedron on the pillar.
2. Transfer the connector through the hole and leave it at the floor fan.

1. Pick up the jammer and point it to the upper wall above the terminal that blocks access to the blue button.
2. Pick up the connnector and jump on the floor fan.

1. Use the connector to create a connection between blue laser and the blue button.
2. Jump down to the pillar where you left the hexahedron.

1. Place the connector on top of the hexahedron.
2. With the barrier down, you can now safely access the terminal.

Main Puzzle #5 - Duet

1. Pick up the drill.
2. Make a hole in the wall on the other side of the puzzle room, as shown in the screenshot above.

1. Approach the hole and activate the fan.
2. Return to the drill.

1. Place the drill as shown in the screenshot above.
2. The hole should reveal a room with the second drill.

1. Jump on the platform next to the fan.
2. A gust of wind will deliver you to a room containing a jammer.
3. Use it to disable the barrier which you can see through the hole.
4. Climb out of the room via the ladder.

1. Pick up the second drill.
2. Transfer it through the hole.

1. Pick up the first drill and leave it aside.
2. Pick up the second drill and make a hole in the same wall through which you transfered it through.
3. The jammer should still point to the same disabled barrier.
4. Pick up the first drill and transfer it through the hole.

1. Pick up the second drill.
2. Make a hole near the switch on the wall.
3. Jump on the platform near the fan.
4. Transfer the jammer through the hole in the wall.
5. Climb out of the room via the ladder.

1. Pick up the second drill.
2. Make a hole in the wall behind which there is the terminal.
3. Pick up the first drill and leave it on the platform.

1. Pick up the jammer.
2. Point it through the hole at the barrier.
3. You can now get to the terminal.

Main Puzzle #6 - Passage

1. Pick up the fan from the red platform.
2. Jump onto the second fan.

1. A gust of air will take you to a upstairs room with the third fan.
2. Place the fan on the platform.
3. Pick up the drill.
4. Get on the platform next to the fan.
5. A gust of wind will carry you to the room with the next drill.

1. Make a hole in the wall.
2. Pick up the second drill and transfer it through the hole.
3. Pick up the first drill and put it aside.

1. Jump down.
2. Pick up the second drill and make a hole in the wall behind which there is the first drill.

1. Climb the ladder.
2. Pick up the first drill.
3. Transfer it through the hole.
4. Return back down.

1. Pick up the first drill.
2. Use it to make a hole in the ceiling and leave it on the platform near the first fan.

1. Pick up the second drill.
2. Stand under the first hole and make a new hole in the next ceiling so the jammer falls down.

1. Pick up the jammer and jump on the second fan.
2. Point the jammer to the barrier behind which there is the terminal.
3. Leave the jammer on the platform.

1. Pick up the fan and jump on the platform.
2. Put the fan down.
3. Jump down.

1. Pick up the second drill and make a hole in the wall.
2. Come back for the fan.
3. Throw the fan through the hole.

1. Place the fan back in its original place.
2. Jump on the platform next to the fan.
3. A gust of wind will carry you to the terminal.

Main Puzzle #7 - Eye of the Needle

1. Pick up the drill.
2. Place it on the second platform (the one near the connector).
3. Pick up the connector.

1. Place the connector on the first platform.
2. Pick up the drill.
3. With the drill, make a hole in the wall as shown in the screenshot above.
4. Transfer the hexahedron through the hole.

1. Pick up the connector.
2. Leave the connector on the second platform.
3. Place the hexahedron by the low fence.
4. Jump onto the hexahedron.
5. Jump over the fence.

1. Pick up the jammer.
2. Point the jammer to the barrier near the second platform, the one that isn't active.
3. Climb out of the room via the ladder.

1. Pick up the connector.
2. Make a connection between blue laser and the blue button.

1. Pick up the drill.
2. Proceed to the next area of the puzzle.
3. Drill a hole in the wall as shown in the screenshot above.

1. Pick up the connector without severing the connection.
2. Place the connector on the platform.
3. Jump over the small fence.
4. Aim the jammer at the barrier that can be seen through the hole.

1. Climb out of the room via the ladder.
2. Take the hexahedron.
3. Pick up the connector from the platform without severing the connection and place it aside.
4. Place the hexahedron on the platform.

1. Pick up the connector without severing the connection.
2. To joined links, add a connection to the blue button at the terminal.
3. Leave the connector in the area shown in the screenshot above.
4. The laser beam should pass through the hole.
5. You can now start the terminal.

Main Puzzle #8 - Seesaw

If you use only a single connector in progress of solving this puzzle, you can unlock a very rare Single Rod trophy. You can learn more about how to unlock it on the How to solve Seesaw puzzle? page.

Lost Puzzle #1 - Keeping Connections

This puzzle can be encountered near the area where you've concluded Main Puzzle #4.

1. Pick up the drill.
2. Make a hole in the wall on the left.

1. Pick up the connector.
2. Make a connection with the laser and leave the connector for now.

1. Pick up the drill.
2. Make a hole in the wall on the right as shown in the screenshot above.
3. You should be able to see the red button through the hole.

1. Pick up the connector without interrupting the connection with the laser.
2. Add another connection, this time with the red button and leave the connector in the area shown in the screenshot.
3. The connector should now link the laser on the other side and the red button.

1. With the barrier down, pick up the second connector.
2. Make a connection between the red laser on the other side wall and the red button.
3. Leave the second connector in the area shown in the screenshot above.

1. Pick up the first connector but sever the links.
2. Connect the first and the second connector and the red button near the terminal at the end of the puzzle room.
3. Activate the terminal.

Lost Puzzle #2 - Loop

This puzzle can be encountered nearby the area where you've concluded Main Puzzle #8.

1. Place the connector on the platform.
2. Make a hole with the drill and leave it on the same platform as the connector.
3. Pick up the connector and throw it through the hole.
4. Place the connector on the platform before the terminal.
5. Place the hexahedron on the other platform.
6. Activate the terminal.